Cleaning hardwood floors – Do It Yourself
Nowadays, many people have opted for hardwood floors because they look very elegant and classy. With a proper type of cleaning system in place, a hardwood floor can be extremely durable.
The cleaning hardwood floors process may vary slightly according to the type of finish the floor has. There are two types of hardwood floor finishing namely: wax and polyurethane. The latter is more common and easier to clean. There is a particular way to clean each of them. However, a few variations are available. Each of the methods discussed below can be considered as among the best ways to clean hardwood floors.
Cleaning hardwood floor with water is viable and does not cause any damage to the wood. However, you should bear in mind that the floor should not remain wet for a long time after cleaning. The floor must be dried immediately and, if there are holes, water should not be allowed to seep into them because it will slowly start to ruin the floor at that particular weak point. For this reason, never splash or pour water on the hardwood floor. Instead, use a mop. A mop should be made wet to have a dampening effect on the floor. Ensure you remove all debris and dirt from the floor before you start mopping.
Use of a broom or vacuum cleaner is another sound way to clean hardwood floors if the dirt is at manageable levels. Brooms, unlike water, are available almost everywhere. Mopping and brooms work in tandem. Brooms can be used to clear hard particles which can make scratches on your beautiful floor when mopping. Periodic vacuuming and sweeping is vital.
You should use an appropriate hard surface extension when vacuum cleaning. Never use household sprays and other regular dust treatments.
Ph Neutral Cleaners are good hardwood floor cleaning products to use for removing grime and dirt. However, they can damage your hardwood finish when you use them continuously. Exercise restraint. These Ph Neutral Cleaners do not require rinsing and they work by dissolving stains without damaging the finish. In case you want to get rid of spills and stains from your hardwood floor without causing damage to your finish you should consult with your flooring expert and get advice on which cleaning product to use. Otherwise, you can use a cleaner that is PH neutral and water based. A good example is a solution of water and vinegar. This mixture is easy to make and will keep your floor clean and shiny. Some people add Penisol to give the wooden floor a good clean smell.
You May Also Like:: Guide on How To Choose The Best Vacuum For Carpets
The following is a list of what you should not do when cleaning hardwood floor.
- Never use ammonia.
- Never use cleaners that might leave a residue or film.
- Never use wax over surface finishes.
- Never use excess water.
- Never drag furniture when moving just lift.
Best hardwood floor cleaning for scratches and stains: start removing them working from the outside towards the center. To get rid of sticky substances – especially chewing gum – place a plastic bag full of ice on top and wait for it to become brittle and then sweep it away.
To keep your hardwood floor beautiful and durable is not an easy task. It requires regular cleaning. The best way to cleaning hardwood floors depend on what type of finish it has. However, using the above tips your hardwood floors will be clean and last a long time.
Important information about hardwood floor repair
Woody floors get scratched more easily than any other type of floor.
Hardwood Floor Scratch Repair
After the surface gets scratched the good looking facade swiftly fades. The scratches are not acceptable yet they are unavoidable. The need to address such a problem then arises.
Hardwood Floor Repair Tips
When the floor gets damaged, you can repair the floor or hire a professional. If you know how to do the repair it is better to do it to save the costs of hiring a professional.
One thing that is important to note is that these floors should be repaired with immediate effect when damaged. A delay in repair of a small part leads to damage of the whole floor. When the whole floor is damaged, the cost of replacement or Repair Hardwood Floor Damage will be higher. It is therefore necessary to conduct minor repairs to save the cost of full replacement. The floor should be checked regularly to ensure that any damage is noticed at an early stage.
Repairs are necessary when the boards of hardwood rise
The boards rise because of high humidity levels from beneath. These repairs should be done immediately to avoid the larger problem of a tripping floor. This problem is difficult to address and will most likely require an expert.
When the boards rise the problem can be addressed by fixing using screws. The screw returns the rising part to normal. The rising boards can also be repaired by using a cement block. Cement block is the best choice for permanent repair of the floor.
When thinking about repairs of the floor, the costs associated should be considered. It is necessary to ask the experts about the most appropriate way to repair the floor.
Sometimes the large planks of wood appear loose. These planks of wood can be fixed using a nail. The nail is hammered in at the loose part. You should be careful when hammering. Improper hammering can make the problem worse. When the wood planks are much looser the problem is solved by replacing the whole plank of wood.
Some parts of the floor may become stained. The stained parts ruin the beauty of the floor. These can be repaired as well. The problem can be fixed by refinishing the whole floor if the stains are all over. There is also an optional way of repairing the stains…
Try repairing the stained part starts by using sand paper to scrape the wood. Acid mixture is then applied over the scraped part. Water is then poured on then wiped with a white cloth. The process is repeated until the stains are over. The final step is rinsing the area using vinegar. The process of hardwood floor repair is not a difficult one.