How to Remove Carpet Stains With Liquids - Best Vacuum For Hardwood Floors 2018

How to Remove Carpet Stains With Liquids

April 30, 2016

Removing carpet stains is not impossible but it can be a hard job if you don’t know what you’re doing. After carpet stains have seeped into carpet fibers, if not removed immediately, they can easily become a permanent fixture. Cleaning carpet stains is essential because they can ruin a perfectly good carpet and you will then have to replace the carpet more often than would otherwise be necessary. Carpet odors and germs can spread. This leaves harmful bacteria behind so taking care of any problems early on can save you a great deal of hassle in the long run. Pre-emptive action saves time and money. Carpet stains can be removed with a variety of products and, in most cases, a simple household cleaner can do the job just as well as specialty carpet cleaners.

Removing Carpet Stains with Water

Removing Carpet Stains with Water Once a carpet stain makes an appearance, your immediate solution should be the use of hot or warm water. Using a clean cloth, paper towel or rag, you can daub or mop up most stains or spills quite easily. The cloth will soak up the liquid and help to prevent odors from forming. Do not soak the carpet, get the cloths just wet enough to get the area clean. Don’t overdo it.

Ammonia as a Carpet Cleaner

Ammonia as a Carpet Cleaner Ammonia is a weapon that can be highly effective on carpet stains. You can mix this household chemical by adding one tablespoon to every half cup of water. Never clean a carpet with a pure solution of ammonia because it is harsh can and can cause irreparable damage. Daub the mixed liquid onto any carpet stains and let it sit for a few minutes. Afterwards, using a sponge with fresh, clean water, you can cleanse the spot repeatedly until it is sucked into the sponge. The ammonia solution helps to knock loose the stains.

Clean with Vinegar

Clean with VinegarGreat for using in cooking, vinegar can be a powerful cleaner for your carpets and the stains they accumulate. Like with ammonia, never use vinegar in raw form. Always mix it with water before you apply it to a rug or carpet stain. 1/3 cup should be added to 2/3 cup of water to get the perfect ratio.

Daub the area of the spot or stain and then apply a clean, water-soaked sponge over the area to remove the stains fully. Stains caused by beer can be cleaned with vinegar very easily.

Remove Stains with Rubbing Alcohol

Remove Stains with Rubbing AlcoholUnlike vinegar and ammonia, you do not have to mix a solution of alcohol and water because in its raw form the alcohol will not cause damage like the other two harsh cleaners. Ink is a stain that can be almost impossible to remove, especially if you have a carpet that is particularly light in color. A judiciously placed piece of furniture is how most people take care of an ink stain. A very sticky sort of ink spot can be removed by applying the rubbing alcohol over the stain, even if that stain is blood. Unlike with ink, water may help to remove the blood a little more easily than if you just used the alcohol by itself. You can test all of these household products to try to clean up a spill or stain before it becomes bonded to the carpet fibers. Don’t waste money on the raft of cleaning products in the stores unless you come across a stain that is simply too stubborn to be removed by the cleaning items mentioned above. Steer clear of harsh and dangerous carpet solutions unless you have no other choice.

You May Also Like: How to Get Rid Of Fleas in Carpet

Leave a Comment: