Keeping your Bissell ProHeat 2X Revolution Pet Turbo upright carpet cleaner in top condition ensures optimal performance and a longer lifespan. Regular maintenance helps prevent common issues like reduced suction, clogs, or brush problems. In this guide, you’ll find practical, step-by-step instructions to troubleshoot, clean, and care for your machine safely and effectively.
Whether you’re addressing a specific problem or just want to keep your cleaner running smoothly, this comprehensive maintenance guide will walk you through the essential steps to keep your Bissell performing like new.
Key Takeaways
| Regular Cleaning | Clean brushes and filters regularly to maintain suction. |
| Proper Storage | Store in a dry, cool place to prevent damage. |
| Troubleshooting Basics | Identify common issues like clogs or motor problems quickly. |
| Use Approved Products | Always use Bissell-recommended solutions to avoid damage. |
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner, 35799
- Powerful Suction: 40% more suction with TurboStrength motor
- Quiet Operation: 50% noise reduction for quieter cleaning
- Max Clean Mode: Removes dirt, stains, and allergens
As an affiliate, we earn on qualifying purchases.
Initial Inspection and Basic Troubleshooting
- Start by unplugging your cleaner and inspecting the power cord for any damage or fraying. Replace if necessary.
- Check the water tank to ensure it’s filled correctly and seated securely. A loose tank can cause suction issues.
- Make sure the brush roll is free of hair, fibers, or debris. Remove and clean the brush if it’s tangled or blocked.
- Verify that the filters are clean and properly installed. Dirty filters reduce suction and cleaning effectiveness.
- Test the machine on a small, inconspicuous area to confirm it’s operating correctly after these checks.
Cleaning the Brush Roll and Filters
Regularly cleaning the brush roll and filters is crucial for optimal performance. Follow these steps:
- Remove the brush roll by releasing the locking tabs or screws, according to your model’s manual.
- Use a brush or cloth to clear away hair, fibers, and debris wrapped around the brush.
- Wash the brush roll with warm, soapy water and let it dry completely before reinstalling.
- Remove the filters and rinse them under cold water. Do not use soap on filters unless specified by the manufacturer.
- Allow filters to air dry completely before placing them back into the machine.
Addressing Suction and Water Flow Problems
If your cleaner isn’t suctioning well or water isn’t flowing properly, try these steps:
- Check for clogs in the hose, nozzle, or water intake. Remove any debris carefully.
- Ensure the water tank cap is securely closed; a loose cap can affect pressure.
- Inspect the brush roll area and remove any obstructions.
- Verify that the heatwave technology is functioning—if water isn’t staying hot, check for mineral buildup in the water tank and clean as needed.
- If problems persist, perform a thorough cleaning of the internal pathways following the user manual’s instructions.
Replacing Worn or Damaged Parts
Over time, parts like brushes and filters wear out and need replacement. Follow these guidelines:
- Use compatible replacement parts such as the JORAIR Brush Replacement, which fits Bissell CrossWave models but can be helpful for certain cleaning components.
- Regularly inspect the brush roll for signs of wear or damage. Replace if bristles are frayed or missing.
- Replace filters when they become visibly dirty or after the recommended lifespan (usually every 3-6 months).
- Always use manufacturer-approved parts to ensure compatibility and safety.
Safe Storage and Routine Maintenance Tips
Proper storage and routine care prolong your cleaner’s life:
- After cleaning, empty the water tank and rinse it thoroughly to prevent mold or mineral buildup.
- Clean the brushes and filters regularly, ideally after each use if frequently used.
- Store the machine in a cool, dry place away from direct sunlight and extreme temperatures.
- Check the power cord for damage before each use to prevent electrical hazards.
- Schedule deep cleaning and part replacement every 6-12 months based on usage.
The Products in This Guide
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
The BISSELL ProHeat 2X Revolution Pet Turbo (35799) combines advanced TurboStrength™ Motor technology with multiple cleaning modes for versatile and effective carpet cleaning. Its features like Heatwave technology and dual DirtLifter PowerBrushes make it a top choice for maintaining fresh, clean carpets with ease.
Pros:
- 40% more suction power
- 50% noise reduction
- Effective pet stain removal
- Quick dry Express Mode
Cons:
- Heavier than some models
- Higher price point
- Requires regular filter cleaning
Best for: Pet owners and heavy-duty carpet cleaning
Not ideal for: Light cleaning tasks or occasional use
Bottom line: A powerful, pet-friendly upright cleaner with advanced features for professional results.
JORAIR Brush Replacement Compatible
The JORAIR Brush Replacement kit provides multi-surface brush rolls and filters compatible with Bissell CrossWave models, making it a cost-effective solution for maintaining your cleaner’s performance. Regular replacement of these parts ensures consistent cleaning results.
Pros:
- Cost-effective
- Easy to install
- Compatible with many models
- Includes brush and filters
Cons:
- Not compatible with all Bissell models
- Replacement needed every 6 months
Best for: Maintaining your Bissell CrossWave or similar devices
Not ideal for: For exclusive use with the ProHeat carpet cleaner
Bottom line: A practical replacement kit to keep your CrossWave running smoothly.
Frequently Asked Questions
How often should I clean the filters on my Bissell ProHeat 2X?
It’s recommended to clean the filters after every few uses and replace them every 3-6 months, depending on usage and visibility of dirt.
What should I do if my cleaner has lost suction?
Check for clogs in the hose and nozzle, clean or replace filters, and ensure the water tank is seated correctly. If the problem persists, inspect the brush roll area for obstructions.
Can I use any cleaning solution with my Bissell ProHeat 2X?
Only use Bissell-approved solutions like the Multi-Surface Solution or Deep Clean Pro 4X. Using incompatible products can damage the machine or void the warranty.
How do I prevent mold or odors from developing inside the machine?
Empty and rinse the water tank after each use, clean the filters regularly, and store the cleaner in a dry, cool place. Avoid leaving water in the tank for extended periods.
How do I replace the brushes or filters?
Follow the instructions in your user manual to remove the brush roll and filters. Install new parts securely, ensuring they are compatible with your model.
Keep Your Bissell in Top Shape with Simple Maintenance
Regular troubleshooting and care are key to prolonging the life of your Bissell ProHeat 2X Revolution Pet Turbo. By performing routine checks, cleaning parts, and replacing worn components, you can ensure your machine continues to deliver professional-grade results. Remember, proper maintenance not only improves cleaning effectiveness but also extends the lifespan of your device, saving you time and money in the long run.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
